Filter
Top Products
103
5. Appendix
When the Front Cover Does Not Close
When "Close Front Cover" appears on
the panel display, even if the cover
seems to be closed properly, it is not.
When the front cover does not close,
confirm that the Transfer Unit is at-
tached firmly.
The Transfer Unit is attached to the
position shown in the illustration.
A
AA
A
Turn off the power switch and
unplug the power cable.
B
BB
B
If the light brown lever is in the
position shown in the illustra-
tion, turn it counterclockwise.
C
CC
C
Push in the Transfer Unit until it
stops.
Confirm that the protrusion inside
the printer is in the upper left hole
of the Transfer Unit.
D
DD
D
Turn the light brown lever clock-
wise.
Close
Front Cover
ZDJH995J
ZDJH014E
ZDJH999J
ZDJH992J
ZDJH020E
JupP1k_GB_Mainte_F_FM.book Page 103 Thursday, August 22, 2002 4:23 PM