Filter
Top Products
Troubleshooting
96
4
K
KK
K
Close the front cover for the 2
Tray Finisher.
If the error message does not clear
even after the misfed paper is re-
moved, detach the 2 Tray Finisher
from the printer to check for the
misfed paper there.
Reference
See p.88 “Detaching the 2 Tray
Finisher” for details about how
to detach/reattach the 2 Tray
Finisher from/to the printer.
L
LL
L
Return the Output Tray back into
place.
A Raise the tray.
B Lower it slowly.
When "Remove Misfeed Y:
Paper Tray" Appears
A
AA
A
Open the Lower Right cover for
the Paper Feed Unit, and pull out
the misfed paper.
B
BB
B
Close the Lower Right cover for
the Paper Feed Unit.
When "Remove Misfeed
:Duplex Unit " Appears
R
CAUTION:
A
AA
A
If the 2 Tray Finisher is installed,
detach it from the printer.
Reference
⇒ p.88 “Detaching the 2 Tray
Finisher”
ZDJP085J
ZDJP086J
• The inside of the machine be-
comes very hot. Do not touch the
parts with a label indicating a
"hot surface". Touching a "hot
surface" could result in a burn.
ZDJY209J
JupP1k_GB_Mainte_F_FM.book Page 96 Thursday, August 22, 2002 4:23 PM