Filter
Top Products
Replacing Consumables and Maintenance Kit
12
1
C Lift and hold the green handle
at the top (A
AA
A), and pull out the
unit slowly (B
BB
B).
H
HH
H
Install a new Photoconductor
Unit.
For black, install one, and for color,
install three.
A Take the unit out from the bag.
Important
❒ Do not remove the cover that
is attached to the bottom of
the Photoconductor Unit at
this time.
B Place the Photoconductor Unit,
and remove the adhesive tape
at the tip of the unit.
C Match the green arrow at the
tip of the Photoconductor Unit
to the rail inside the printer.
Important
❒ Make sure the green arrow
fits securely on the rail before
proceeding to the next step.
D Push the front of the Photocon-
ductor Unit slowly, slide the
unit on the cover, and push in
until it stops.
ZDJH210J
ZDJH221J
ZDJH222J
ZDJH223J
ZDJH224J
JupP1k_GB_Mainte_F_FM.book Page 12 Thursday, August 22, 2002 4:23 PM