Filter
Top Products
69
4. Troubleshooting
Error & Status Messages on the Control
Panel
❖
❖❖
❖ Status Messages
❖
❖❖
❖ Alert Messages
Messages/Second messages Description Solution
Calibrating... The printer is calibrating the
color.
Wait for a while.
Energy Save Mode In Energy Save Mode Level 2. No action required.
Hex Dump Mode In Hex Dump Mode. No action required.
Loading Toner... The printer is loading the ton-
er.
Wait for a while.
Offline The printer is offline and can-
not print data.
Press {
{{
{On Line}
}}
}.
Initializing... Please Wait The printer is initializing the
development unit.
Wait for a while.
Printing... The printer is doing print job. Wait for a while.
Processing... Print data is being processed. Wait for a while.
Ready The default ready message.
The printer is ready to use.
No action required.
Resetting Job... Job is being reset. Wait for a while.
Waiting... The printer is waiting for the
next data to print.
Wait for a while.
Warming Up... The printer is warming up
and not ready.
Wait until the printer signals
Ready.
Messages/Second messages Description Solution
Add Staples The stapler is out of staples.
Job is not stapled.
Replace new staples.
See p.100 “Adding Staples”.
Add Toner/Yellow/Magen-
ta/Cyan/Black
The printer is out of the indi-
cated toner(s).
Replace a new toner cartridge
of the indicated color(s).
See p.1 “Replacing Consuma-
bles and Maintenance Kit”.
Add Toner Black The printer is out of toner (K). Replace a new toner cartridge
(K).
See p.1 “Replacing Consuma-
bles and Maintenance Kit”.
JupP1k_GB_Mainte_F_FM.book Page 69 Thursday, August 22, 2002 4:23 PM