Filter
Top Products
Paper and Other Media
58
3
Loading Paper
Load paper and change the paper size
in Tray 1, Tray 2 and the optional Pa-
per Feed Unit by following the proce-
dures below.
Important
❒ Tray 1 uses A4 K paper exclusive-
ly. Load only A4 paper at all times.
❒ 2000-sheet Large Capacity Tray
uses A4 K paper exclusively. Load
only A4 paper at all times.
❒ If you want to load Letter-sized pa-
per (11 × 8
1
/
2
K) in Tray 1 and op-
tional 2000-sheet Large Capacity
Tray, contact your sales or service
representative.
Reference
See p.47 “Paper Sizes” concerning
paper to be loaded in the Paper
Tray and optional Paper Feed
Unit.
Loading Paper in Tray 1
Important
❒ Tray 1 uses A4 K paper exclusive-
ly. Load only A4 paper at all times.
❒ If you want to load Letter-sized pa-
per (11 × 8
1
/
2
K) in Tray 1, contact
your sales or service representa-
tive.
A
AA
A
Pull out the paper tray slowly un-
til it stops.
B
BB
B
Load paper into the tray with the
print side down.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
C
CC
C
Carefully slide the paper tray into
the printer until it stops.
ZDJH003J
ZDJY001J
JupP1k_GB_Mainte_F_FM.book Page 58 Thursday, August 22, 2002 4:23 PM