Filter
Top Products
34 C3663M-B (11/09)
• Services/MaxAlarmDuration: Limits the amount of time an alarm event is recorded, if not reset by an alarm panel.
• Services/PacketDelayMS: Sets a delay, in milliseconds, between packets sent.
• Services/PacketSize: Limits th
e size, in bytes, of packets sent to the client.
• Services/PTZUserT
imeout: The number of seconds before a PTZ camera resumes a tour, after a user has stopped controlling PTZ
functions.
• Services/SerialDelimiter: A character or string that separates each field in a message from a card reader. A hexadecimal character
must be preceded by “0x.”
• Services/SerialFieldCount: Limits th
e number of fields saved from a message from a card reader.
• Services/SerialLog: Cr
eates a log of all data read on the COM port. You can choose not to create a log (0), to create a log on ASCII
characters (1), or to create a log on hexadecimal format (2).
• System/ActiveAlert: Act
ivates the optional ActivEye
®
Active Alert
™
software, if properly licensed and installed. Refer to the Active Alert
User Manual for details.
• System/DeleteOrphanFilesHour: The hour of the day when a search for orphan files is performed.
• System/Dele
teOrphanFilesMax: The maximum number of orphan files that can be deleted during an orphan search.
• System/ErrorLogAge: Se
ts the number of months to retain message log data.
• System/ErrorLogRowsDelete: Sets the number of expired rows to delete at a time.
• System/ManualReco
rd: Limits the amount of time that manual recording can be activated before timing out.
• System/V
ideoArchiveTrend: Limits the amount of data (in months) that is stored in the VideoArchiveTrend table, which documents the
number of days video is stored before it is overwritten.
• Video Server/FastSwitch: Records even and odd fields from an XMUX2 unit. Change this only under the advice of a trained technician.
• V
ideo Server/FSRetryCount: Limits the number of times Digital Sentry tries to initialize a multiplexer. When initialization fails this many
times, Digital Sentry waits the amount of time set in Video Server/FSRetryDelay before attempting initialization again.
• V
ideo Server/FSRetryDelay: Sets the time between multiplexer initialization attempts. Digital Sentry tries initializing the multiplexer the
number of times set in Video Server/FSRetryCount before starting this delay.
Figure 30. Throttle Exempt Addresses Window
THROTTLE EXEMPT ADDRESSES
The Throttle Exempt Addresses page (refer to Figure 30) allows you to exempt client computers from the packet restrictions selected on the
Configuration Parameters page. Each computer exempted can download video at the fastest available rate.
To exempt a client computer, type its IP address and click Update List. To delete a computer from the list, select it and click Delete. To delete all
computers from the exempt list, click Delete All.