Filter
Top Products
10. Exclusive Commands 2
10.1 ATC Exclusive Command
- 347 -
(7) Tool table "FWD" rotation
The tool table rotates in "FWD" direction in accordance with the magazine rotation.
R4750 1000
R4751 1001
：：
：：
R4760 1010
R4710 S.ATC K7
ACT
M10 R4710
(Note 1) In this control mode, pointer always indicates "0"
(tool table head).
(Note 2) When this command is executed, the relationship
between magazine No. and tool No., appearing on the tool entry
display, changes accordingly.
(8) Tool table "REV" rotation
The tool table rotates in "REV" direction in accordance with the magazine rotation.
R4750 1000
(Note 1) In this control mode, pointer always indicates "0"
(tool table head).
(Note 2) When this command is executed, the relationship
between magazine No. and tool No., appearing on the tool entry
display, changes accordingly.
R4751 1001
：
：：
R4759 1009
R4710 S.ATC K8
ACT
M10
R4710
：