Filter
Top Products
9. Exclusive Commands 1
READ, SREAD, WRITE, SWRITE
- 314 -
Device Item Set data
Setting
range
Set by
(S1)+13 Date/Hour of error
occurrence
Higher 8 bits : hour (00H to 23H),
lower 8 bits : date (01H to 31H)
b15 to b8 b7 to b0
Hour (00H to 23H) Date (01H to 31H)
— System
(S1)+14 Minute/Second of
error occurrence
Higher 8 bits : second (00H to 59H),
lower 8 bits : minute (00H to 59H)
b15 to b8 b7 to b0
Second (00H to 59H) Minute (00H to 59H)
— System
(S1)+15 Day of the week of
error occurrence
Higher 8 bits : 00H,
lower 8 bits : day of the week
(00H(Sunday) to 06H(Saturday))
b15 to b8 b7 to b0
00H Day of week
(00H to 06H)
— System
(S1)+16 Error detection
network No.
Stores the network number of the station that
detected an error.
However, it is not stored when the completion
status of (S1)+1 is "Channel in use (C085H)."
1 to 239 (Network No.)
1 to 239 System
(S1)+17 Error detection
station No.
Stores the station number of the station that
detected an error.
However, it is not stored when the completion
status of (S1)+1 is "Channel in use (C085H)."
1 to 64 (Station No.)
1 to 64 System
Execution conditions
The execution conditions for READ, SREAD, WRITE, SWRITE are as shown below.
ON
Command
Executed per scan
G.READ, G.SREAD
G.WRITE, G.SWRITE
OFF
GP.READ, GP.SREAD
GP.WRITE, GP.SWRITE
Executed per scan