Filter
Top Products
10. Exclusive Commands 2
10.1 ATC Exclusive Command
- 346 -
(5) Pointer "FWD" rotation
In the ATC control with floating pointer, pointer count is controlled so that it coincides with the
actually indexed magazine position when the magazine rotates in "FWD" direction for index.
R4715 1 2
Pointer is incremented.
R4715
S.ATC
K5
ACT
M10 R4710
When a magazine with 10 tools is used, the control
sequence is as follows:
0, 1, 2, 3 ........ 9, 0, 1, 2, ........ 8, 9, 0, 1 ...
(Note 1) When this command is executed, the
relationship between magazine No. and tool No.,
appearing on the tool entry display, changes
accordingly.
(6) Pointer "REV" rotation
In the ATC control with floating pointer, pointer count is controlled so that it coincides with
actually indexed magazine position when the magazine rotates in "REV" direction for index.
R4715
2 1
Pointer is decremented.
R4715
S.ATC
K6
ACT
M10
R4710
When a magazine with 10 tools is used, for example, the
control sequence is as follows:
2, 1, 0, 9, 8 ........ 2, 1, 0, 9, 8 ........ 1, 0, 9, 8 ...
(Note 1) When this command is executed, the
relationship between magazine No. and tool No.,
appearing on the tool entry display, changes
accordingly.