Filter
Top Products
9. Exclusive Commands 1
READ, SREAD, WRITE, SWRITE
- 312 -
Control data
Device Item Set data
Setting
range
Set by
Execution type b15 ~ b7 ~ b0
0 (2) 0 (1)
(1) Execution type (bit 0)
0:No arrival confirmation
When the target station is on the same
network:
Completed when the data is sent from
the local station.
Execution
source
Completion
Target
station
When the target station is on the other
network:
Completed when the data arrives at
the relay station on the network of the
local station.
Execution
source
Completion
Target
station
Rela
y
staion
1:With arrival confirmation
Completed when data is written to the
target station.
Execution
source
Completion
Target
station
Rela
y
staion
Completion
Target
station
(S1)+0
Error complete type (2) Error complete type (bit 7)
Designate whether the clock data setting
is required or not at error completion.
0:Clock data setting not required:
Clock data at error occurrence is not
stored in (S)+11 to (S)+17.
1:Clock data setting required:
Clock data at error occurrence is
stored in (S)+11 to (S)+17.
0001
H
0081
H
User
(S1)+1 Completion status Store the status at completion of a command.
0:Normal
Other than 0:Error (error code)
— System
(S1)+2 Channel used by the
local station
Set the channel used by the local station.
1 to 8 User
(S1)+3 (Not used) — — —