Filter
Top Products
6
1 BEAUTY COVER
★ The beauty cover snaps open and shut to hide the keypad’s keys, mode and
supervisory indicators, and the sensor location labeling area.
2 KEYPAD
★ Backlit keys for easy viewing in low light conditions.
★ For entering the user's user code (numerically or alphabetically).
★ Used when programming system options.
★ Press to activate the Automation Output.
★ Press to clear keypad if the wrong key is pressed.
★ Press for two seconds to view sensor battery and supervisory status (see
BATTERIES and RADIO indicator description).
3 24-HOUR BUTTONS
★ Pressing FIRE for two seconds sounds the fi re siren and sends a “fi re” message
to a central monitoring station through the digital communicator (if the system
is monitored).
★ Pressing EMERGENCY for two seconds sounds the emergency siren and sends
an “emergency” message to a central monitoring station through the digital
communicator (if the system is monitored).
★ Both work even when system is disarmed.
★ IMPORTANT: For personal emergency use only. Not for use as a UL Listed
Medical Alert System.
4 SYSTEM SUPERVISORY INDICATORS
★ Shows the current status of the system.
POWER LIGHT
★ Glows when AC power is on.
★ Blinks when AC power is off and backup battery is installed.
★ Blinks when the backup battery is low, recharging or missing.
★ Off when AC power is off and no backup battery is installed (system disabled).
BATTERIES LIGHT
★ Blinks when one or more sensors have a low battery.
★ Press for two seconds to view sensor status. Sensor status indicator for any
sensor with a low battery will light along with the BATTERIES indicator.
★ Switch to Test Mode after replacing the sensor battery and completely test the
system (see Test Mode). Switching to Test Mode clears the low battery indication.
RADIO LIGHT
★ Blinks when one or more sensors have not reported status during the eight hour
status time period.
★ Press for two seconds to view sensor status. Sensor status indicator for any
sensor that has not reported in will light along with the TROUBLE indicator.
★ Switch to Test Mode after servicing the sensor and completely test the system
(see Test Mode). Switching to Test Mode clears the trouble indication.
5 MODE INDICATORS
★ The indicators next to the mode keys light to show the current system mode.
★ HOME indicator will blink during Secure Exit and Home Instant modes.
★ AWAY indicator will blink during the exit delay in the Away Mode.
6 MICROPHONE (OPTIONAL)
★ Location for the high sensitivity microphone included with the Model RSM-2
speaker/microphone kit.
★ Detects room audio when communicator is reporting to the Central Station
in 2-way audio mode (Model VB-2 digital voice response module and RSM-2
speaker/microphone kit must be installed).
7 SENSOR STATUS INDICATORS
★ Blacked-out sensor status indicators are only visible when lit.
★ Indicate the status of each of the system's wireless sensors and hardwired
loops.
★ Indicators show which doors and windows are open.
★ Indicators fl ash to display sensors that have caused an alarm.
★ Stick-on labels are provided to identify the custom sensor locations.
8 SYSTEM STATUS INDICATORS
★ Shows the current status of the system.
READY LIGHT
★ Lights when all system sensors are closed.
★ Shows that the system is ready to be armed.
★ The system can be armed without the READY indicator being lit, if sensors are
bypassed either manually or automatically.
ARMED LIGHT
★ Blinks during the exit delay.
★ Lights when the system is fully armed.
TROUBLE LIGHT
★ Lights when the system has detected supervisory trouble.
★ Supervisory trouble can be caused by power, sensor low battery, or sensor radio
supervision conditions.
★ Press for one second then view the system supervisory and status indicators
to determine the origin of the trouble.
9 MODE BUTTONS
★ Used to operate the system.
OFF
★ Off Mode disarms the system.
★ Switching to Off Mode stops the alarm siren.
✓ Multiple Beeps sound and sensor status indicators fl ash if an alarm has
occurred.
☞ Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
CHIME
★ Chime Mode disarms the system.
★ Switching to Chime Mode stops the alarm siren.
✓ Multiple Beeps sound and sensor status indicators fl ash if an alarm has
occurred.
☞ Multiple Beeps mean caution. AN INTRUDER MAY STILL BE PRESENT.
★ Chime Mode is for monitoring doors and windows.
✓ Use this mode as an “automatic door chime” when at home.
✓ Opening any protected door or window causes the keypad(s) to “ding-dong”.
HOME
★ Home Mode arms the perimeter sensors, but not the interior sensors.
✓ Use this mode when anyone is staying behind.
✓ Interior motion detectors and interior door sensors are not armed.
✓ Home secure mode makes all delayed perimeter sensors instant.
✓ Secure exit mode starts an exit delay while remaining in Home Mode.
✓ Re-entering during the exit delay restarts the exit delay (one time only).
AWAY
★ Away Mode arms the entire system.
✓ Use this mode when leaving home.
✓ Door sensors set for delayed will have a time delay that allows the user to
leave and enter the premises without sounding the alarm.
✓ Re-entering during the exit delay restarts the exit delay (one time only).
✓ Entry Delay Beeps warn the user to disarm the system before the siren
starts.
TEST
★ Test Mode is for testing the system sensors.
✓ All sensor status lights blink when the Test Mode is entered.
✓ Each sensor status light will stop blinking when its sensor is tested.
★ Hold the TEST button down to test all of the keypad's indicator lights.
10 SOUNDER
★ Makes unique sounds for burglary, fi re and emergencies.
★ Alarm sirens stop automatically after fi ve minutes.
★ Sounds advisory tones to confi rm keystrokes from the keypad.
★ Sounds mode selection tones.
★ Sounds alarm memory tones.
★ Beeps when Automation Output is activated.
★ The Control Panel has terminals available for an external siren.
11 SPEAKER (OPTIONAL)
★ Location for the speaker included with the Model RSM-2 speaker/microphone
kit.
★ Sounds voice operating prompts and audio from the Central Station (Model
VB-2 digital voice response module and Model RSM-2 required).
4. HARDWIRED KEYPAD FEATURES
4
3
5
9
6
7
8
10
1
2
11