Filter
Top Products
IMPORTANT
The following information need only apply when changing plugs on Sentria
™
models
that are used in the U.K., Australia, South Africa and New Zealand.
The wires in the main lead are coloured in accordance with the following code:
Blue Neutral Brown Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured marking identifying
the terminals in your plug, proceed as follows:
WARNING: DO NOT connect either wire to the terminal marked "E" or with the earth = symbol. No wire is con-
nected to this terminal. The wire which is coloured Blue must be connected to the terminal which is marked with the letter
N or coloured black. The wire which is coloured Brown must be connected to the terminal which is marked with the letter
L or coloured red. If a U.K.: 13A (BS 1363) plug is used, fit a 5A fuse. For any other type plug, protect with a 5A fuse or
fuse wire in the adaptor or distribution board. If the plug does not fit the sockets in the user's house, it should be cut off
and safely disposed of and the correct plug fitted.
The Sentria
™
Model G10E is approved by the British Electrotechnical Approvals Board (BEAB).
Warning: There is a shock hazard if a plug that has been cut from
the supply cord is inserted in a 13A socket outlet. Any
replacement fuse in the plug must be an ASTA approved
BS1362 5A fuse in the U.K.
Warning: If the fuse cover is removable, never use the plug with the
fuse cover removed.
If supply cord is damaged and needs to be replaced, the replacement part number is: 890806-Australia/New Zealand;
890906-Continental Europe; 890706-South Africa; 890606-United Kingdom; 192006-U.S.A.;
P/N 260006 Rev. B - U.S., Canada and U.K.
Printed in U.S.A.
©2006 The Scott Fetzer Company
72