Filter
Top Products
Canister Cleaner & Attachments
BLOWER SET-UP
Your Sentria system can also be used as a blower. To do so,
you must first remove the Power Nozzle (25).
NOTE: When using your Sentria system as a blower, you
may choose between the Upright Handle (17) or the Portable
Handle (15).
1
Turn the power OFF, place the Tech Drive
®
power
assist in Neutral (see page 8 for details), unplug
the unit from the wall outlet and press the Toe-Touch
Control Bottom Pedal (9) all the way down until noz-
zle is fully raised. >
2
Raise the Headlight Hood (21) and flip out the handle
on the Belt Lifter (20). Use it to turn the Belt Lifter all
the way to the left (counter-clockwise) until the red
arrows line up. >
3
Unlock the Power Nozzle (25) by turning the Accessory
Lock (22) all the way to the left (counter-clockwise). The
Power Nozzle should tip forward when it is released.
Lift nozzle away from the Sentria system. >
4
When using the blower attachments, the Air Intake
Guard must be attached to the front of the unit.
Fasten the Air Intake Guard onto the Attaching Bar (24)
the same way you would the Attachment Hose. Then lock it
on by turning the Accessory Lock (22) all the way to the right
(clockwise). >
23