Filter
Top Products
Canister Cleaner & Attachments
CLEANING THE PORTABLE SPRAYER (cont)
3
The spray opening on the front of the Sprayer also
pulls out so that the inside of the Sprayer and the
nozzle jet can be cleaned.
To remove the nozzle jet, press on the two latches on the
front of the nozzle jet and pull it out. (The latches must
be aligned with the holes on the front of the Sprayer when
returning the nozzle jet to the front of the Sprayer.)
Then, fill the jar with water. Spray water until the spray
becomes clear. Reassemble the Sprayer after cleaning so
none of the parts will be lost. •
PORTABLE SHAMPOOER SET-UP
The Portable Shampooer is used in the Blower Mode only.
It is designed for fast and easy cleaning of carpeted stairways
and areas that are difficult to reach with the Carpet Shampoo
System.
1
To set up the Portable Shampooer, attach the Portable
Shampooer cap to the end of the Portable Sprayer. >
Remove the jar from the Portable Sprayer and fill
the jar about 3/4 full with Kirby
®
Carpet Shampoo
mixture (Mix according to the instructions on the
bottle.) USE ONLY KIRBY CARPET SHAMPOO for
best results. >
3
Screw the jar tightly on the Portable Sprayer, then
attach the Sprayer to the Attachment Hose.
(Make certain your Sentria
™
system is set up as a
Blower Unit. The Attachment Hose should be connected
to the side Air Exhaust Port (19). •
27