Filter
Top Products
Canister Cleaner & Attachments
BLOWER SET-UP (cont)
5
To remove the entire Bag Assembly, grasp the Mini
Em-Tor
®
collector (6) in the hand-hold provided and
rotate it out and away from the Sentria system as far as
it will go. Then lift it off.
Release the Outer Permanent Bag Top from the Bag Support
by pressing the Bag Release Button (16) and sliding the bag
top down. >
6
Place the large end of the Attachment Hose over the
Air Exhaust Port (19). Line up the Indicator Arrow
on the Hose End with the Indicator Arrow on the Air
Exhaust Port and twist the Hose Connector to the right
(clockwise) to lock it in place.
If the Sentria system will not operate, see page 59. •
USING AS A BLOWER
Your Sentria system may now be used as a blower.
By attaching the Inflator/Deflator Tool to the Attachment
Hose, you can inflate toys, air mattresses or any other
low-pressure inflatable item up to 1 p.s.i. (pounds per
square inch of air pressure). >
To deflate items, connect the Attachment Hose to the front
of the unit and connect the Inflator/Deflator Tool to the
Attachment Hose. Then connect the Bag Assembly to the
Air Exhaust Port.
You may now use your Sentria system to deflate items.
NOTE: You can also use this set-up to clean tight areas such
as computer keyboards and audio/video equipment. •
24