Filter
Top Products
Operating/Maintenance Tips
Questions and Answers/Trouble shooting
Q I SMELL BURNING RUBBER WHEN I USE MY Sentria™ SYSTEM
WHAT SHOULD I DO?
A 1. Check to see if the Brash Roll is turning when the Sentria system is running. If not, then
the Brush Roll may be stalled due to threads around the ends. Remove Brush Roll and
make sure it rotates freely at both ends. (See page 54.)
2. The belt may not be fully engaged (or disengaged). Make sure the green arrows or red
arrows on the Belt Lifter (20) match up fully.
3. If a slipping belt has deposited a black residue on the Motor Shaft (23), remove it gently
using steel wool or sandpaper and replace the belt.
Q HOW DO I VACUUM MY MATTRESS?
A 1. Remove all bedding, including mattress cover, from the mattress.
2. Convert your upright Sentria system to a Portable Cleaner. See "Portable Cleaning"
on page 16.
3. Place Portable Cleaner on the mattress.
4. Disengage Tech Drive
®
power assist by pressing the gray "N" side (marked "N" for
Neutral) of the N/D Pedal (11).
5. Disengage the Brush Roll.
6. Plug in your Sentria system and turn it ON.
7. Lower the Power Nozzle by pressing the Toe-Touch Control Upper Pedal (8) until it is
all the way down.
8. Begin vacuuming.
Q HOW DO I VACUUM MY CARPETED STAIRS?
A There are several different ways. You can use:
• the Portable Cleaner. (See page 16.)
• the Zippbrush. (See page 45.)
• or the Upholstery Nozzle. (See page 21.)
Q HOW DO I CLEAN UNDER MY BED?
A Your Sentria system can be used in the canister mode (see page 19) with the Surface
Nozzle to vacuum under the bed and other low furniture.
IMPORTANT:
Always exercise caution when vacuuming stairways.
60