Filter
Top Products
Optional Accessories
CLEANING THE CARPET SHAMPOO
SYSTEM (cont)
4
Turn the Accessory Lock (22) to the left (counter-
clockwise). The Carpet Shampoo System Nozzle/Tray
Assembly will tip forward.
Lift the Nozzle/Tray Assembly off the Sentria
™
system and
carry it to the sink. >
5
Remove the hose from the tray and rinse.
6
By using the handle, turn the Belt Lifter to the right
(clockwise) until the green arrows line up. Pull the tray
and nozzle apart. Rinse tray. >
7
To clean the brush, push the thumb pads located at
each end of the plastic shield and rotate the shield up
and away from the brush.
Disconnect the shield by gently pulling out the ends of the
tray just behind the Brush Roll.
Push the Brush Roll down out of the tray by simultaneously
pushing on both ends of the brush with both thumbs.
Rinse all areas of the shield tray and brush, and remove any
lint from brush tufts.
Shake excess water from the Brush Roll by brushing hand
over the bristles and then drying with a towel. >
34