Upright & Portable Cleaner
UPRIGHT CORD MANAGEMENT
The Sentria system Upright handle incorporates a series of
hooks and fasteners to keep the cord off the floor and attached
to the upright handle for your convenience.
1
When using your Sentria system as an upright, snap
the power cord into the two cord holders located on the
back of the handle. >
2
With the Upper Cord Hook in the up or 12 o'clock
position, route the cord toward the rear of the unit and
slide the cord in to the c-shaped holder on the Upper
Cord Hook. The cord can now be wrapped around the Upper
and Lower Cord Hooks for storage. To quick-release the
cord for use, rotate the Upper Cord Hook down to the 6
o'clock position. The c-shaped holder is designed to hold the
cord securely in place and prevent the first loop from drop-
ping to the floor.
NOTE: The cord can only be inserted or removed from the
c-shaped holder when the Upper Cord Hook is in the 12
o'clock position. •
13