Filter
Top Products
Canister Cleaner & Attachments
USING THE PORTABLE SHAMPOOER
1
Before shampooing, vacuum surface thoroughly.
To make suds, turn the Sentria
™
system ON and pull
the trigger of the Portable Sprayer. A stream of suds
will come out of the cap.
The suds can be sprayed directly onto the surface being
cleaned or on a plain paper bag or in a bowl and then applied
to the surface being cleaned. >
2
Adjust the Portable Sprayer for proper suds volume by
turning the Spray Adjustment Control located on the
trigger. >
3
Work suds into the surface with a soft clean, white
brush or sponge until they disappear. Allow the surface
to dry completely.
Then vacuum with the appropriate cleaning tool. This
will remove the dry residue which contains grime and
loosened dirt. •
/!\ IMPORTANT:
The Portable Shampooer is not recommended for use on upholstery
or fabrics such as silk, brocade and velvet. If in doubt, try a test patch.
Let the test patch dry and then check it before you shampoo further.
28