Filter
Top Products
Optional Accessories
LOCKING OUT THE HANDI-BUTLER TOOL
®
When leaving the Handi-Butler tool in the table-top mode
unattended, it is recommended that the user lock out the tool to
prevent accidental starting or access to the tool by children.
With the unit securely seated in the Mounting Cradle (G),
insert the tines of the Lockout Bar (I) in to the slots at the base
of the On-Off pedal of the Sentria unit. Then, slide the hole on
the Lockout Bar over the eyelet on the Mounting Cradle. The
user can then place a combination lock (not provided) through
the eyelet to securely lock the Handi-Butler tool and prevent it
from running until the lock is removed. •
Operating/Maintenance Tips
PART FIVE
Your Kirby
®
Sentria
™
system is a highly sophisticated
home maintenance system. As with most modern appliances,
it requires a modest degree of routine maintenance to keep
it operating efficiently. This section of the Owner's Manual
presents tips on operating and maintaining your Sentria sys-
tem. In this section, we will discuss the following:
Changing the Power Nozzle Belt
Adjusting the Brush Roll for Optimum
Performance
Miscellaneous Parts Replacement
Helpful Answers to Questions/
Troubleshooting
54