Filter
Top Products
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53500080-01 Printed in U.S.A. Form 50VQP-C1SI Pg CL-2 11-10 Replaces: New
Copyright 2010 Carrier Corporation
-
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - -
CUT ALONG DOTTED LINE CUT ALONG DOTTED LINE
HEATING CYCLE ANALYSIS
COOLING CYCLE ANALYSIS
HEAT OF EXTRACTION (ABSORPTION) OR HEAT OF REJECTION =
FLOW RATE (L/s) x TEMP. DIFF. (DEG. C) x FLUID FACTOR* =
(kW)
SUPERHEAT = SUCTION TEMPERATURE – SUCTION SATURATION TEMPERATURE
=
(DEG C)
SUBCOOLING = DISCHARGE SATURATION TEMPERATURE – LIQUID LINE TEMPERATURE
=
(DEG C)
*Use 500 for water, 485 for antifreeze.
SUCTION
COMPRESSOR
DISCHARGE
COAX
EXPANSION
VALVE
°C
°C
AIR
COIL
°C
kPa
WATER OUT
WATER IN
°C
kPa
LOOK UP PRESSURE DROP IN TABLE 8
TO DETERMINE FLOW RATE
°C
LIQUID LINE
kPa
°C
DEW
POINT
LOOK UP PRESSURE DROP IN TABLE 17
TO DETERMINE FLOW RATE
SUCTION
COMPRESSOR
DISCHARGE
COAX
EXPANSION
VALVE
°C
°C
AIR
COIL
°C
kPa
WATER OUT
WATER IN
°C
kPa
LOOK UP PRESSURE DROP IN TABLE 8
TO DETERMINE FLOW RATE
°C
LIQUID LINE
kPa
°C
DEW
POINT
LOOK UP PRESSURE DROP IN TABLE 17
TO DETERMINE FLOW RATE