Filter
Top Products
BES-961BC • BES-1261BC
96
Chapter 5 Setting
Setting of Machine
Machine motions can be set.
Embroidery Hoop
Specify a type of an embroidery hoop set on the machine.
■ A type of a hoop to be selected varies depending on a type of a hoop (flat or cap)
selected by a switch on the operation panel.
When a flat hoop is selected Tabular square hoop
Sash frame
Flat hoop
When a cap hoop is selected Cap hoop
■ All heads or every other head can be selected by pressing .
All heads
Every other head (The heads with odd numbers only are operated).
■ When operating every other head, refer to "Bed Retract" (→ Page 45) and retract
heads with even numbers.
1. Press
.
2. Select
by pressing .
3. Press .
4. Select a type of a hoop by pressing .
5. Select either all heads or every other head by pressing .
6. Press
END
.
Modified setting is saved and the previous screen is displayed again.
All heads or every other head as
currently selected
Currently selected hoop