Chapter 8 Standard Adjustment
BES-961BC • BES-1261BC
147
6. After timing adjustment the is finished for each
head, set the pulley B q to the stop position
(at 100˚ of the scale) and press
ESCESC
. The
machine enters the standby state.
The adjustment of the rotary hook is completed
and the timing is stored. The rotary hook
returns to the stop position accordingly.
↓
5. Adjustment of Presser Foot Height
1. Turn the power switch off.
2. Select the needle bar No. 1.
3. Loosen the screw w of the presser foot q, and adjust the presser foot q until it comes
above the cloth top surface when it is at the alignment position (where the pulley B indication
mark "3" and the cover indication mark "3" are aligned).
w
q
material