Filter
Top Products
Chapter 6 Operation of Machine
BES-961BC • BES-1261BC
122
No.1 Stitch No.2 Stitch No.3 Stitch
1. Turn off the MENDING lamp No. 3 at the
standby position A.
(The position A should be the mending end
position.)
2. Press the jog switch or
to move it
backward.
Turn off the MENDING lamp No. 2 at the
position B.
(The position B does not become the end
position; the position A remains the end
position.)
Note) When the MENDING switch of the machine head
whose lamp is off is pressed:
• The MENDING lamp of the machine head is
lit, and mending is executed for the machine
head.
Note) When the MENDING switch of the machine head
whose lamp is on is pressed:
• The MENDING lamp of the machine head goes
off and mending is not excuted for the machine
head.
No.1 Stitch No.2 Stitch No.3 Stitch
No.3
Mending LED is off.
Stand by
position A
B
Stand by
position A
Mending LED
When a thread breakage error is occurring, refer to "Setting of Mending" (→Page 99) as well in order to
correct missing stitches caused by a thread breakage.