Filter
Top Products
BES-961BC • BES-1261BC
78
Chapter 4 Editing of Embroidering Data
What Can the Machine Do?
Editing
■ Enlargement/reduction is executed ahead of rotation. When an embroidery
pattern is so set to be rotated by 90˚ and then enlarged by 2 times in the X-axis
direction, the X-axis enlargement is executed first and rotation by 90˚ is executed
afterwards. Therefore, a pattern is enlarged by 2 times at the sewing point.
Rotation of embroidery pattern (→ Page 79)
Enlargement/reduction of embroidery pattern in the X-axis direction
(→ Page 80)
Enlargement/reduction of embroidery pattern in the Y-axis direction
(→ Page 80)
Mirror pattern (→ Page 82)
Right/left mirror pattern
Up/down mirror pattern
Zero point symmetric mirror pattern
No. of repetitions in the horizontal direction (lines) (→ Page 84)
No. of repetitions in the vertical direction (rows) (→ Page 84)
( ) Distance in the horizontal direction between two outer hoop
centers (→ Page 84)
( ) Distance in the vertical direction between two outer hoop
centers (→ Page 84)
Direction of repetitions (→ Page 84)
Horizontal direction from upper left to lower right
Vertical direction from upper right to lower left
Horizontal direction from lower right to upper left
Vertical direction from lower left to upper right
Horizontal direction from upper right to lower left
Vertical direction from upper left to lower right
Horizontal direction from lower left to upper right
Vertical direction from lower right to upper left
0 stitch deletion (→ Page 86)
Thread trimming feed number (→ Page 87)
Swing width correction (→ Page 87)