Filter
Top Products
Chapter 1 Preparation of Embroidery Machine
BES-961BC • BES-1261BC
26
q
w
r
w
q
e
e
w
q
3-4 Mounting of Table
■ Mounting of F table
1. Tentatively mount the F table guides U q and L w on both sides of the legs using two bolts
each.
2. Tentatively mount there F table supports F e on the leg front using two bolts each.
3. Tentatively mount five F table stoppers r on the rear legs using two bolts each.
Note) • The steps 1 and 3 are required only when the F table set is purchased separately from the machine.
• The F table is a standard attachment.