Filter
Top Products
BES-961BC • BES-1261BC
65
Chapter 3 Selection of Data and Embroidering
Registration of Embroidery Data from BE-100
Connect the operation panel and the personal computer with BE-100 installed in
order to register the embroidery data into the machine memory.
1. Connect the personal computer with BE-100 installed and the operation panel
by means of the RS-232C cable.
2. Press the .
3. Select the data registration screen by pressing the
.
4. Select an area for data registration by pressing ten keys or , and then
press the
key.
5. Press the .
When a floppy disk is set
When no floppy disk is set
Personal computer with BE-100 installed
Dedicated communication cable (Option)
Operation panel