Filter
Top Products
Chapter 6 Operation of Machine
BES-961BC • BES-1261BC
118
1. Operating Procedures
1-1 Power Source
• Turn the power on to the machine.
• A message is displayed on the LCD.
• The alarm sounds three times and the needle
bar and the presser foot move upward. Then
the hoop moves to the zero point and the
sewing data screen is displayed.
Note) When turning the power off and back it on again,
wait for at least 10 seconds.
1-2 Preparation for Embroidering
• Select embroidering data.
• Using the jog switches ( ), determine a position to start embroidering.
Note) An error message is displayed on the LCD if a pattern comes out of the hoop.
• Pressing
START
starts embroidering.
• After embroidering is finished, the machine is placed in the stand-by state.