Filter
Top Products
Chapter 1 Preparation of Embroidery Machine
BES-961BC • BES-1261BC
29
!0
o
u
y
t
!0
9. Fix the legs and the table using the F table stays A (3 pcs.) o and B (2 pcs.) !0 while the F
table R t, M (2 pcs.) y, and L u are fixed at the upper position.
* Dismounting can be carried out in the reverse procedures.
Note) • Use two F table stays (B) with one notch at both ends of the F table R t and L u.
• When mounting the F table stays A (3 pcs.) o and B (2 pcs.) !0, fit the F table stay notch into the table,
then fix the notch to the legs using the thumb bolts.
Dismounting can be carried out in the reverse procedures.
• When the F table is at the lower position, the F table stays A and B need not be used.