Filter
Top Products
BES-961BC • BES-1261BC
90
Chapter 5 Setting
What Can the Machine Do?
Setting of Needle Bars
Needle bars allocated in the sequence of embroidering (→ Page 92)
Setting of Thread Breakage Sensor
Thread breakage sensor ON/OFF (→ Page 93)
Thread breakage sensitivity (→ Page 93)
Number of stitches in automatic step back (→ Page 94)
Display of total stitch number in automatic step back
Lower thread counter counts (→ Page 95)
Stitch counter indication (→ Page 95)
Setting of Machine
Selection of embroidery hoop (→ Page 96)
Display of every head/every other head (→ Page 96)
Speed range (→ Page 97)
Speed in speed range (→ Page 98)
Thread trimming length (→ Page 101)
Thread removal feed length (→ Page 101)
Inching ON/OFF (→ Page 102)
Sewing area (→ Page 103)
Resetting of thread breakage error (→ Page 100)
Needle bar stop at mending stop point (→ Page 100)
Method of thread trimming before thread breakage error (→ Page 100)
Method of thread trimming before stop (→ Page 100)