Filter
Top Products
Chapter 1 Preparation of Embroidery Machine
BES-961BC • BES-1261BC
41
y
r
y
t
i
y
r
q
w
e
e t
u
1mm
1mm
■ Holder base (optional)
Attaching the holder base frame
1. Set the table. (Refer to "3-4 Mounting of Table" (Page 26) for details.)
2. Mount the frame connecting plate R w on the X-axis feed frame q, using six bolts, washers,
and nuts.
3. Insert the frame connecting plate y into the holder base frame L e, holder base frame C r,
and holder base frame R t, using bolts and washers.
4. From the front, put the holder base frame C assembly r under the frame connecting plate R
w and fix it using four bolts.
5. Check that the clearance between the table and the mounted holder base frame C assembly
r is even when viewed from the machine front.
[Adjustment] Loosen three bolts of the F table support F y and move it in the direction of the arrow for adjust-
ment.
Felt
Table