Filter
Top Products
BES-961BC • BES-1261BC
101
Chapter 5 Setting
Thread Trimming Length
Length of thread to leave on the needle bar after thread trimming can be set for
each needle bar.
■ This function is previously set to 5 upon shipments.
1. Press
.
2. Select
by pressing .
3. Press .
4. Select a needle bar to modify by pressing .
Press for setting the same speed range for all needle bars.
5. Input thread length by pressing ten keys.
Thread length can be input within the range of 1 ~ 10. Length decreases as the figure decreases.
When inputting "10", press the
0
SPACE
first.
6. After setting is finished with all needle bars, press
END
.
Modified setting is saved and the previous screen is displayed again.
Thread Withdrawal Feed Length
Thread withdrawal length can be set before thread trimming.
■ The input range is 0 ~ 100mm.
■ This function is previously set to 15mm upon shipments.