Filter
Top Products
Chapter 6 Operation of Machine
BES-961BC • BES-1261BC
120
3. Measures against Thread Breakage
3-1 Remedies
1. If embroidering is suspended due to thread
breakage, the THREAD SENSOR lamp of the
machine head with a thread breakage blinks.
2. Correct the broken thread and pass it through
again.
* Refer to "Chapter 1, 4-1 Upper Threading" (→ Page 34)
for details.
3. Press the STOP switch or press the STEP
BACK/FWD switch in order to reset the alarm.
STOP
4. Return the hoop to a position where thread
breakage occurred by pressing the STEP
BACK switch.
or
Note) When the switch is turned for 20 stitches or more,
the machine continues operation without holding
the switch. To stop the machine, turn the switch
to the opposite side.
5. Press the START switch on the operation
panel or the start switch located between the
machine heads to resume operation.
START
or
3-2 Mending