Filter
Top Products
Chapter 1 Preparation of Embroidery Machine
BES-961BC • BES-1261BC
28
e
i
r
e
t
y
u
w
w
7. Dismount the F table R t, M (2 pcs.) y, and L u once, and lower the F table support F e.
Then, place the F table R t, M (2 pcs.) y, and L u on the F table guide L w bending section.
Fix the F table support F e at this height and insert the pins on the rear of the F table R t, M
(2 pcs.) y, and L u into the holes of the F table stopper r.
Note) Fix the F table stopper and the F table guide L securely at this position.
8. Insert the F table R t, M (2 pcs.) y, and L u into the upper and lower positions respectively,
then check if the table can be securely fixed by the thumb bolts i. If not, shift the F table
support F e to the right and left for further adjustment.