Filter
Top Products
BES-961BC • BES-1261BC
92
Chapter 5 Setting
Setting of Needle Bars
Needle bars allocated in the sequence of sewing can be modified.
■ This setting is explained on the basis of the BES-1261BC screen.
1. Press
.
2. Select a sewing sequence to modify by pressing .
The current embroidering sequence is selected while embroidering is interrupted.
Press for modifying all sequences at one time.
3. Input the number of a needle bar by pressing ten keys.
When inputting a numerical figure exceeding 10, press the
0
SPACE
first.
Insertion of Feedhold
Press and reverse the display on the right of a point to insert a feedhold, then
press
STOP
.
4. Press
END
.
Modified setting is saved and the previous screen is displayed again.
When all sequences are modified at the same time, the screen for checking if the setting needs
to be saved. Press
for saving the setting.
A feedhold mark is displayed.