Filter
Top Products
Operation 5-5MN1904
3. In the Select Controller dialog, go to t he drop down box near the top and select the PC serial
port to which the NextMove BX
II
is connected.
(If you are unsure which PC serial port is connected to the NextMove BX
II
, select Scan all
serial ports. During the detection process, a dialog box may be displayed to tell you that
WorkBench v5 has detected new firmware. Click OK to continue.)
Click Scan to search for the NextMove BX
II
.
When the search is complete, click on NextMove BX
II
in the list to highlight it, and click the
Select button.
Note: If the NextMove BX
II
is not listed, check the serial lead between the
NextMove BX
II
and the PC. Check that the NextMove BX
II
is powered correctly .
Click Scan to re-scan the ports.
When detection is complete, Fine-tuning mode will be displayed.