Filter
Top Products
2-2 Introduction MN1904
2.2 Receiving and inspection
When you receive your NextMove BX
II
, there are several things you should do immediately:
1. Check the condition of t he packaging and report any damage immediately to the carrier that
delivered your NextMove BX
II
.
2. Remove the NextMove BX
II
from the shipping container. The packing mat erials may be
retained for future shipment.
3. Verify t hat the catalog number of t he NextMove BX
II
you received is the same as the catalog
number listed on your purchase order. The catalog/part number is described in the next
section.
4. Inspect the NextMove BX
II
for external damage during shipment and report any damage to
the carrier that delivered it.
5. If the NextMove B X
II
is to be stored for several weeks before use, be sure that it is stored in
a location that conforms to the storage humidity and temperature specifications shown in
section 7.1.10.
2.2.1 Identifying the catalog number
NextMove BX
II
is available with different specifications. As a reminder of which model has
been installed, it is a good idea to write the catalog number in the space provided below.
Catalog number:
NMX004-_______
Installed in: ________________________
Date: ______
A description of the catalog numbers are shown in the following table:
Catalog
number
Description
NMX004-501 NextMove BX
II
, for control of 2 axes
NMX004-502 NextMove BX
II
, for control of 3 axes
NMX004-503 NextMove BX
II
, for control of 4 axes