Filter
Top Products
3-4 Basic Installation MN1904
3.2.1 Mounting the NextMove BX
II
Ensure you have read and understood the Mechanical installation and location requirements in
section 3.2. Mount the NextMove BX
II
on its rear side, the side opposite the front panel.
The NextMove BX
II
must be mounted upright to ensure adequate cooling. M5 bolts or screws
should be used.
302 (11.9)
58.5 (2.3)
40 (1.6)
312 (12.3)
194 (7.6)
203 (8.0)
(Allow additional depth to accommodate wiring)
All dimensions shown as mm (inches)
Figure 1 - Package dimensions
This completes the basic installation.
You should read the following sections in
sequence before using the NextMove BX
II
.