Apple 6 Water System User Manual


 
Chapter 4 Using the Log and Transfer Window 85
Incrementing Logging Fields
Most of the logging fields have an Increment button you can click to increase the value
of the last character of the clip name by one, according to the following rules:
 Any numbers at the end of a field are incremented by one.
 Any single letters at the end of a field are incremented alphabetically by one from
A to Z.
 Any single letters preceded by numbers are incremented alphabetically from A to Z.
After Z, the number increases by one and the letter starts over at A, and then the
cycle repeats.
 A number is appended to any fields ending with multiple letters, and is incremented
by one. For example, ABC is followed by ABC1, then ABC2, and so on.
Setting Audio and Video Clip Import Settings
You can open the Import Settings pane by clicking the Import Settings button in the
Logging area. Here you can specify whether video or audio is ingested, as well as the
number and grouping of the audio channels. Audio meters display audio input levels
on enabled channels.
Note: Some formats, such as AVCHD, are automatically mixed down to stereo. For these
formats, you cannot adjust audio settings.
When a single clip is selected in the Browse area, clip import settings are applied
to that clip.
To apply import settings to multiple clips:
1 Shift-click or Command-click multiple clips in the Browse area to select them.
2 Enable video and audio channels in the Import Settings pane.
3 Click Apply to Selection, then click OK in the dialog that appears.
Two audio channels
enabled and grouped as
a stereo pair
One mono channel
enabled