Filter
Top Products
Chapter 1 Working with HDV 23
When an HDV Easy Setup is chosen, only two audio channels are available for capture.
You can choose to capture one channel or you can capture both audio channels, either
as two discrete mono tracks or a single stereo pair.
Capture Settings Tab
Use this tab to specify scratch disks for capture. You can also specify scratch disk settings
by choosing Final Cut Pro > System Settings and then clicking the Scratch Disks tab.
Log and Capture Buttons
As you log and capture, use the following log and capture buttons.
 Log Clip: Logs a single clip with the current logging information and clip settings.
 Capture Clip: Logs and captures a single clip with the current logging information,
clip settings, and capture settings.
 Capture Now: Captures the current video and audio input to a media file on disk until
you press the Escape key. No In or Out points are necessary. You can use this to
capture an entire tape in a single pass. When scene breaks are detected, new media
files and corresponding clips are created automatically.
 Capture Batch: Captures the selected clips in the Browser, or the clips in the currently
assigned logging bin.
Click here to open the
Scratch Disks tab.
Current scratch disk
capacity and Capture
Now settings are
shown here.