Filter
Top Products
Teledyne API – Technical Manual - Model 300E Family CO Analyzers Basic Operation
91
6.5.1. SETUP CFG: CONFIGURATION INFORMATION
Pressing the CFG key displays the instrument’s configuration information. This display lists the analyzer model,
serial number, firmware revision, software library revision, CPU type and other information.
Special instrument or software features or installed options may also be listed here.
Use this information to identify the software and hardware installed in your M300E/EM Analyzer when
contacting customer service.
To access the configuration table, press:
6.5.2. SETUP ACAL: AUTOMATIC CALIBRATION
Instruments with one of the internal valve options installed can be set to automatically run calibration procedures
and calibration checks. These automatic procedures are programmed using the submenus and functions found
under the ACAL menu.
A menu tree showing the ACAL menu’s entire structure can be found in Appendix A-1 of this manual.
Instructions for using the ACAL feature are located in the Section 9.4 of this manual along with all other
information re
lated to calibrating the M300E/EM Analyzer.
04288D DCN5752