Filter
Top Products
Getting Started Teledyne API – Technical Manual - Model 300E Family CO Analyzers
56
3.6.3. O
2
SENSOR CALIBRATION PROCEDURE
If your M300E/EM is equipped with the optional O
2
sensor, this sensor should be calibrated during installation of
the instrument. See Section 9.7.1 for instructions.
3.6.4. CO
2
SENSOR CALIBRATION PROCEDURE
If your M300E/EM is equipped with the optional CO
2
sensor, this sensor should be calibrated during installation
of the instrument. See Section 9.7.2 for instructions.
The M300E/EM Analyzer is now ready for operation
NOTE
Once you have completed the above set-up procedures, please fill out the Quality Questionnaire that
was shipped with your unit and return it to Teledyne API.
This information is vital to our efforts in continuously improving our service and our products.
THANK YOU.
.
04288D DCN5752