Filter
Top Products
Teledyne API – Technical Manual - Model 300E Family CO Analyzers
xvi
14.4.2.1. Working at the Instrument Rack ................................................................................................ 309
14.4.2.2. Working at an Anti-ESD Work Bench........................................................................................ 309
14.4.2.3. Transferring Components from Rack to Bench and Back......................................................... 310
14.4.2.4. Opening Shipments from Teledyne API’ Customer Service ..................................................... 310
14.4.2.5. Packing Components for Return to Teledyne API’s Customer Service.................................... 311
LIST OF APPENDICES
APPENDIX A - VERSION SPECIFIC SOFTWARE DOCUMENTATION (Revision L.8)
APPENDIX A-1: M300E/EM Software Menu Trees
APPENDIX A-2: Setup Variables For Serial I/O
APPENDIX A-3: Warnings and Test Functions
APPENDIX A-4: M300E/EM Signal I/O Definitions
APPENDIX A-5: M300E/EM iDAS Functions
APPENDIX A-6: Terminal Command Designators
APPENDIX A-7: MODBUS Register
APPENDIX B - M300E/EM SPARE PARTS LIST
APPENDIX C - REPAIR QUESTIONNAIRE - M300E
APPENDIX D - ELECTRONIC SCHEMATICS
LIST OF FIGURES
Figure 3-1:
Front Panel Layout.......................................................................................................................31
Figure 3-2: Rear Panel Layout .......................................................................................................................32
Figure 3-3: Internal Layout – M300E..............................................................................................................33
Figure 3-4: Internal Layout – M300EM with CO
2
and O
2
Sensor Option........................................................34
Figure 3-5: Optical Bench Layout...................................................................................................................35
Figure 3-6: M300E/EM Internal Gas Flow (Basic Configuration)...................................................................36
Figure 3-7: Analog Output Connector ............................................................................................................39
Figure 3-8: Status Output Connector .............................................................................................................40
Figure 3-9: Control Input Connector...............................................................................................................41
Figure 3-10: Pneumatic Connections–Basic Configuration–Using Bottled Span Gas.....................................44
Figure 3-11: Pneumatic Connections–Basic Configuration–Using Gas Dilution Calibrator.............................45
Figure 5-1: M300E/EM with Carrying Strap Handle and Rack Mount Brackets ............................................62
Figure 5-2: Current Loop Option Installed on the Motherboard .....................................................................63
Figure 5-3: Internal Pneumatic Flow OPT 50A – Zero/Span Valves..............................................................65
Figure 5-4: Pneumatic Connections – Option 50A: Zero/Span Calibration Valves........................................66
Figure 5-5: Internal Pneumatic Flow OPT 50B – Zero/Span/Shutoff Valves .................................................67
Figure 5-6: Pneumatic Connections – Option 50B: Zero/Pressurized Span Calibration Valves....................68
Figure 5-7: Internal Pneumatic Flow OPT 50H – Zero/Span Valves with Internal Zero Air Scrubber ...........69
Figure 5-8: Pneumatic Connections – Option 50H: Zero/Span Calibration Valves .......................................70
Figure 5-9: Internal Pneumatic Flow OPT 50E – Zero/Span/Shutoff Valves with Internal Zero Air Scrubber71
Figure 5-10: Pneumatic Connections – Option 50E: Zero/Span Calibration Valves........................................72
Figure 5-11: M300E/EM Multidrop Card Seated on CPU above Disk on Module ...........................................73
04288D DCN5752