Filter
Top Products
Teledyne API – Technical Manual - Model 300E Family CO Analyzers Advanced Features
121
7.1.5.8. Enabling/Disabling the HOLDOFF Feature
The iDAS HOLDOFF feature prevents data collection during calibration operations and at certain times when
the quality of the analyzer’s CO measurements may not be certain (e.g. while the instrument is warming up). In
this case, the length of time that the HOLDOFF feature is active is determined by the value of the internal
variable (VARS), DAS_HOLDOFF.
To set the length of the DAS_HOLDOFF period, see Section Error! Reference source not found..
To enable or disable the HOLDOFF, follow the instruction shown in Section 7.1.5 then press:
04288D DCN5752