StorageTek 312564001 Water System User Manual


 
54 DB2 Manager User Guide
StorageTek Proprietary
Display detail status
D(ISPLAY) T(ASK = (T|D|W|S)nnn
This request is used to produce a detailed display of the status of the DB2
Manager control region retrieval configuration. The DISPLAY command may
be abbreviated to the single character 'D'. The TASK parameter may be
abbreviated to the single character 'T'. 'nnn' is the numeric identifier of the
task to be displayed (where ‘nnn’ consists of 1-3 numeric characters in the
range 1-256). This should be preceded by the character ‘T’ for a tape reader
task, ‘D’ for a disk reader task, ‘W’ for a writer task and ‘S’ for a scheduler
task. If omitted, a default entry of ‘T’ will be used. This entry must be a valid
task number, as displayed via a summary status display request.
A detail status request will first of all display message OTD20063 for the
identified task. For busy tasks with a non-zero queue length, a detail status
request will display one set of OTD20066 and OTD20067 messages for each
request in the queue. These messages will display the following fields:
Request - the entry number of the request in the queue. The request
currently being processed will have an entry number of 1.
Type - identifies the type of request queued. This can take the
following values:
Open A request to connect to an Archive
Manager database for update processing
Retrieve A row retrieval request
Store A row storage request
Commit A request to commit updates to an Archive
Manager database
Close A request to disconnect from an Archive
Manager database after completion of update
processing
DBID - the 4-character identifier of the Archive Manager database
being processed by the task
Jobname - the name of the job initiating the request
Stg level - the Archive Manager database storage level being processed
by the task. Will be present for storage or retrieval requests
only.
Tape - the sequence number of the tape dataset within the Archive
Manager database storage level being processed by the task.
Will be present for storage and retrieval requests only.
Blockid - the 4-byte identifier of the block containing the object being
processed by the task. Will be present for storage and
retrieval requests only.