Filter
Top Products
128 DB2 Manager User Guide
StorageTek Proprietary
Explanation: Identification of objects to be restored from Archive Manager to DB2
cannot be performed via index-only processing, and a SQLIN
parameter of INDEXONLY=Y has been specified (or defaulted).
Execution of the utility cannot continue, and is terminated with a
condition code 12.
Action: Refer to a description of the INDEXONLY execution parameter on
page 95 for a discussion of considerations regarding index-only
processing by the row restore utility. If necessary, change the setting
of the INDEXONLY parameter and re-submit the job.
OTD12014 Error X'xxxx’ Info X'yyyy’ dynamically allocating file SORTIN |
SORTOUT
Explanation: An error has been received attempting to dynamically allocate the
temporary SORTIN or SORTOUT file used by the utility for internal
sort requirements. ‘xxxx’ and ‘yyyy’ give the hexadecimal error and
information codes returned from the dynamic allocation request.
Execution of the utility is terminated with condition code 12.
Action: Refer to IBM documentation on dynamic allocation (SVC99)
processing for a description of the error and information codes
displayed in the message. Take the appropriate corrective action and
re-submit the job. If no obvious cause for the error can be
determined, contact your local STK support representative.
OTD12016 Return Code xx, Supp codes X'yyyyyyyy' received during OPEN |
QUERY | CLOSE processing for Archive Manager database zzzz
Explanation: An error has been received from an Archive Manager open, query or
close request. ‘xx’ gives the return code and ‘yyyyyyyy’ the
hexadecimal supplementary reason codes received from Archive
Manager. Execution of the utility has been terminated with condition
code 12.
Action: Refer to the Archive Manager User Manual for a description of the
return and supplementary codes displayed in the message. Take the
appropriate corrective action and re-submit the job. If no obvious
reason for the error can be identified, contact your local STK support
representative.
OTD12017 Condition Code xx returned from internal sort - examine SYSOUT
dataset for further information
Explanation: A non-zero condition code of ‘xx’ has been returned from an internal
sort request issued by the utility. Processing of the utility is
terminated with condition code 12.
Action: Refer to documentation for the sort product in use on the system on
which the job was executing, for a description of the condition code
displayed in the message. Take the appropriate corrective action