Filter
Top Products
DB2 Manager User Guide 141
StorageTek Proprietary
Action: Examine other system messages for more information on the open
error. Take the appropriate corrective action and restart the control
region.
OTD20002 Error X'xxxx' locating member ENVCNTL | TAPECNTL on SYSPARM
Explanation: Hexadecimal error code 'xxxx' has been received attempting to locate
the ENVCNTL or TAPECNTL member on the DB2 Manager
parameter library. Control region initialization processing is aborted.
Action: Refer to IBM documentation of the LOCATE macro for a description of
the error code. Take the appropriate corrective action and restart the
control region.
OTD20003 ENVCNTL | TAPECNTL member not found in parameter file
Explanation: The member identified in the message was not present on the DB2
Manager parameter library during control region initialization.
Processing is aborted.
Action: Add the missing member to the Archive Manager/OAM parameter
library. Refer to chapter 3 for a description of parameter library setup.
OTD20004 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Explanation: This message is used to display a record from an DB2 Manager
parameter library member which contains an invalid parameter, and a
message explaining the nature of the error.
Two OTD20004 messages are used to display the record - the first
message displays characters 1-40 of the record, and the second
message displays characters 41-80.
OTD20005 ENVCNTL | TAPECNTL parameters being processed
Explanation: The DB2 Manager parameter library member identified in the
message is about to be processed during control region initialization.
Action: None. This is an informational message.
OTD20006 ENVCNTL | TAPECNTL parameter validation errors
Explanation: Errors were detected during validation of parameters in the ENVCNTL
or TAPECNTL member of the Archive Manager/OAM parameter
library during control region initialization processing. The control
region has been terminated.
Action: Refer to the prior OTD20004 messages for details of the individual
parameter validation errors. Correct the invalid parameters and
restart the control region.