Filter
Top Products
32 DB2 Manager User Guide
StorageTek Proprietary
be used for allocation of the index component of
the dataset (KSDS only). This should be a valid
VSAM control interval size. If omitted, a control
interval size of 2k is used for the index
component.
Delete before
define?
Optional entry. Enter the value 'Y' if Archive
Manager should attempt to delete the dataset
before it is defined. Enter 'N' if no deletion
request should be issued.
Press 'ENTER' after all required entries have been made on each panel. After
all AMS control panel entries have been accepted, the database will be
defined and initialized.
The above Archive Manager database definition procedure should be
executed once for each DB2 table which is to be processed by DB2 Manager.
Verify DB2 Manager installation
After all DB2 Manager installation activities, as specified in the preceding
sections, have been successfully performed, product implementation may be
verified by starting the DB2 Manager control region.
Before doing this, ensure that all necessary parameters in the ENVCNTL and
TAPECNTL parameter library members have been coded correctly, as
described in chapter 3.
The DB2 Manager control region may be started by entering the command:
START procedure_name
on the system console.
If ‘COMMAND=REPLY’ has been specified (or allowed to default) in the
ENVCNTL parameter library member, the operator reply message:
OTD20000 Enter request:
will be displayed on the console after successful initialization of the control
region. Operator commands may be entered by replying to the outstanding
operator reply message.
If ‘COMMAND=MODIFY’ has been specified in the ENVCNTL parameter
library member, operator commands may be entered using the MVS MODIFY
command structure.
Refer to chapter 4 of this manual for details of the operator commands
available to control and shutdown the DB2 Manager control region.
If any error occurs during control region initialization processing, refer to the
description of the displayed message in chapter 7 for details of the
initialization error. Perform the appropriate corrective action before restarting
the DB2 Manager control region.