Filter
Top Products
DB2 Manager User Guide 123
StorageTek Proprietary
Explanation: The utility has been unable to obtain an DB2 Manager control region
request element from ECSA storage, in order to pass a request to the
control region. Execution of the utility is terminated with condition
code 12.
Action: This can occur if more than 1024 concurrent migrated row storage
and retrieval requests are active in the system. If this is the case, re-
schedule the row migration job to avoid reaching this limit. If this is
not the case, try stopping and re-starting the DB2 Manager control
region, and re-submitting the job. If the problem still persists, contact
your local STK support representative.
OTD10018 Timeout error occurred when acquiring the scheduler lock
Explanation: The utility has been unable to obtain exclusive access to the control
region scheduler lock within a time interval of 1 minute. Execution of
the utility is terminated with condition code 12.
Action: This condition may occur if the DB2 Manager control region is
exceptionally busy. If this is the case, re-schedule the row migration
job at a less busy time. If this is not the case, examine the control
region job log for exceptional messages which may give more
information about the abnormal condition. Contact your local STK
support representative if the problem cannot be resolved.
OTD10019 Timeout error occurred while waiting on response from the control
region.
Explanation: The utility has passed a request to the control region, but a response
was not received within the timeout limit specified in the
READTIMEOUT parameter in the ENVCNTL parameter library
member. Execution of the utility is terminated with condition code 12.
Action: Examine the job log for the DB2 Manager control region to determine
if any abnormal condition has occurred which prevented the control
region from responding to the request. If no obvious reason for the
timeout can be identified, contact your local STK support
representative.
OTD10020 Return code xx, supp codes X'yyyyyyyy’ received during database
OPEN | COMMIT | CLOSE processing.
Explanation: An error has been received from an Archive Manager open, commit or
close request. ‘xx’ gives the return code and ‘yyyyyyyy’ the
hexadecimal supplementary reason codes received from Archive
Manager. Execution of the utility has been terminated with condition
code 12.
Action: Refer to the Archive Manager User Manual for a description of the
return and supplementary codes displayed in the message. Take the
appropriate corrective action and re-submit the job. If no obvious