Filter
Top Products
154 DB2 Manager User Guide
StorageTek Proprietary
If no apparent cause of the error can be identified, contact your DB2
Manager product support representative.
The ECSA storage used for the DB2 Manager communications table
in this invocation of the control region will be unavailable for allocation
until after the next IPL of the system. Approximately 200 kbytes of
storage are used for the communications table in extended CSA
storage.
OTD20095 Communications table storage area freed
Explanation: The storage area obtained from subpool 241 in extended CSA during
control region initialization processing has been successfully released
during control region shutdown. Processing continues.
Action: None. This is an informational message.
OTD20096 Shutdown processing complete
Explanation: DB2 Manager shutdown processing has been completed successfully.
The control region will terminate normally.
Action: None. This is an informational message.
OTD220xx – control region scheduler messages
Messages from the DB2 Manager control region scheduler are written to the system log.
OTD22001 Scheduler initialization error: invalid control block
Explanation: An invalid control block has been encountered by the scheduler task
during initialization processing. Control region initialization will be
terminated.
Action: This condition indicates an internal error in DB2 Manager processing.
Retain as much information about the error as possible and report the
problem to your local DB2 Manager support representative.